Vespa Diamond Burnishing Pads – 14″ to 27″ Sizes

Vespa Diamond Burnishing Pads, with added circular diamond resin pattern,  delivers comparative polished results to mechanical diamonds at a more economical price.  Innovative design enables more efficient cleaning, restoration, burnishing & buffing of concrete, terrazzo & natural stone to desired polish.  Reversible with embedded diamonds on both sides delivers double the utility & longevity.

Additionally, Vespa Diamond Burnishing Pads efficiently remove scratches, etch marks, soiling, surface imperfections & completely restores problem floors.  Innovative stiff, open-weave design enables improved self-cleaning, heat dissipation & durability.

Vespa Diamond Burnishing Pads can be operated wet & dry under auto scrubbers, high-speed burnishers & larger grinding & polishing machines.  Expect pad life from 5,000 to 8,000 square feet.

• 1500 Max RPM
• Wet & Dry
• 1″ (25mm) Thick
• 40-50 kg/m3 Denisty
• Virgin Polyester
• Color Coded Grits
• Reversible

Color Coded Grit Sequence:

• Light Blue (30 Grit):  Extra coarse mesh for deepest scratches & heavy-duty surface renovation.
• Blue (50 Grit):  Coarse mesh for deep scratches & heavy-duty surface renovation.
• Gray (100 Grit):  Medium coarse mesh for moderate scratches & medium-duty surface renovation
• Yellow (200 Grit):  Medium mesh for moderate scratches & medium-duty surface renovation.
• White (400 Grit):  Medium to finer mesh for light reflective polish & light-duty surface renovation.
• Green (800 Grit):  Fine mesh designed for deep cleaning with economical light reflective finish.  Commonly utilized for large industrial & commercial applications.
• Red (1500 Grit):  Finer mesh for cleaning & polishing.  Produces clear reflective shine.

Operation Guidelines:
Vespa Diamond Burnishing Pads are designed to run at lower 200 RPM to 1500 Max RPM’s.

Caution should be taken on any surface with control joints, expansion joints, cracks, gouges, holes or deep scratches in the surface and any slab height differential.

Deep gouges or scratches should be filled & leveled to prevent damage to pad.
Nails, screws, anchors, anchoring devices, etc., must be removed or ground to the surface of the slab prior to operation.

When running the Vespa Diamond Burnishing Pads wet, the surface should be saturated and continually kept saturated. The wetter, the better.

The heat conducted by operation will quickly turn the slurry into a thickened paste & paste will accumulate & may dramatically reduce pad effectiveness.

It is recommended to thoroughly clean Vespa Diamond Burnishing Pads after each use with water to clear pad of buildup of slurry & dust.
When running the Vespa Diamond Burnishing Pads dry it is highly recommended to utilize active, industrial vacuum system.